✦ Four-point contact ball design – Single-row configuration handles axial, radial, and tilting moment loads in one raceway.

✦ External gear on outer ring – Teeth cut on the outer ring allow direct pinion engagement for rotary drive and positioning.

✦ Ready-to-mount – Both rings come with pre-drilled mounting holes (threaded or through) for bolted installation.

✦ Standardized clearances – Radial clearance 0 to 0.05 mm, axial tilting clearance 0 to 0.08 mm across the series.

✦ Induction-hardened teeth – Gear teeth are heat-treated for wear resistance and bending strength.

✦ Compact cross-section – Uniform 56 mm section height throughout the series, with ring widths at 44.5 mm.

✦ Broad size range – Bore diameters from 342 mm to 1,024 mm, covering medium to large rotary applications.

✦ External gear on outer ring – Direct pinion engagement for rotary motion.

✦ Four-point ball contact – Handles axial, radial, and moment loads together.

✦ Ready-to-mount – Pre-drilled holes for bolted installation.

✦ Hardened gear teeth – Wear-resistant and durable.

✦ Compact section height – Uniform 56 mm profile.

✦ Standardized clearances – Consistent radial and tilting gap specs.

✦ Wide diameter range – Fits bore sizes from 342 mm to 1,024 mm.